The short answer
Yes, RapidFix repairs furnaces, heat pumps, and electric heat strips in Coral Gables homes in the 33134 and 33146 ZIP codes. Heating equipment here sits unused for most of the year, so common problems include burnt-out heat strips, tripped breakers, and heat pumps stuck in cooling mode. Many of these can be fixed in a single visit.
Most Coral Gables homes only need heat on a handful of nights each winter, which is why heating problems catch people off guard. The system sits idle for months. Then the first cool front arrives, you switch the thermostat to heat, and you get a burning smell, cold air, or nothing at all. RapidFix HVAC Repair Service handles furnace repair across Coral Gables, including the 33134 and 33146 ZIP codes, from our base in Miami about 8 miles to the northeast. We also serve South Miami, West Miami, Miami Springs, Miami Beach, and Hialeah.
What "Furnace" Usually Means in a Coral Gables Home
In South Florida, the word furnace covers a few different setups. Many homes heat with electric resistance strips installed inside the indoor air handler. Others use a heat pump, which is the same outdoor unit that cools the house running in reverse, often with heat strips as backup. A smaller number of homes have a gas furnace. Each type fails in different ways, so the first thing our technician does is confirm which one you have.
The type also matters for safety. Electric heat strips draw a lot of current. A gas furnace has a burner, a flame sensor, and venting, and each needs to be checked for proper operation.
Common Heating Problems After Months of Sitting Idle
Equipment that has spent the long cooling season in heavy humidity tends to show the same few issues when heat is finally called for:
A light smell for a minute or two on first startup is usually dust burning off the heating elements. If the smell lingers or smells like melting plastic, turn the system off and schedule service. If you smell gas, leave the house and contact your gas utility first.
- A dusty or burning smell that does not clear after the first several minutes
- Air from the vents that stays cool or lukewarm when the thermostat is set to heat
- Heat strips that trip the breaker as soon as they turn on
- A heat pump that runs but never switches out of cooling mode, often caused by a reversing valve or thermostat wiring issue
- Corroded electrical connections or a failed sequencer or limit switch in the air handler
- On gas furnaces, an igniter that will not light or a flame that shuts off after a few seconds
How a Furnace Repair Visit Works
We start by asking what you noticed and when it started. Then we confirm the thermostat is set and wired correctly before opening the equipment. From there, the technician checks power at the air handler, measures amperage on the heat strips, and tests the safety controls. On a heat pump, we also verify that the system actually switches into heating mode.
Once we find the cause, we explain it in plain terms and give you your repair options before any work begins. Many common fixes can often be handled on the same visit if the part is on the truck. These include replacing a sequencer, limit switch, capacitor, or igniter. If a part has to be ordered, we tell you up front.
Storm Season and Your Heating Equipment
The Atlantic hurricane season runs from June 1 to November 30, which overlaps with the months when your heat goes unused. Power outages and surges during storms can damage control boards, thermostats, and heat strip relays, and nobody notices until heat is needed. Standing water around an outdoor heat pump can also corrode its wiring and components.
If your neighborhood lost power or had flooding this season, test your heat before the first cool front instead of waiting for a cold night. Run the system in heat mode for ten to fifteen minutes and confirm that warm air is coming from the vents.
Repair or Replace?
Because heating equipment gets light use here, most heating problems in Coral Gables homes are worth repairing. Replacement starts to make sense if the heat pump or air handler is also struggling to cool, keeps failing, or needs a major component such as a compressor.
If you are considering a new system, Florida Power & Light runs a Residential HVAC program. It offers rebates on qualifying high-efficiency central air conditioners and heat pumps, delivered through participating contractors at the time of installation. Program terms change, so we confirm the current details before including them in any quote. The federal Energy Efficient Home Improvement Credit applied only to qualifying heat pumps placed in service before December 31, 2025. It is not available for new installations.
More services in Coral Gables
- AC Repair in Coral GablesLocal service & repairs
- Heating Repair in Coral GablesLocal service & repairs
- Heat Pump Installation in Coral GablesLocal service & repairs
- AC Installation in Coral GablesLocal service & repairs
